Coralvue Hydros Room Temp & Humidity Module (0-10V Input) for C4/Wave Engine

Description

Coralvue Hydros Room Temp & Humidity Module (0-10V Input) for C4/Wave Engine.
This 0-10V Input Hydros accessory adds room temp and humidity monitoring to your Control 4 or Wave Engine device (any Hydros device with 0-10V input port)! Using the 0-10V IN port on the Control 4/Wave Engine, the integrated sensor utilizes 2 of the 4 input channels, one for humidity and one for temperature. The included GX12-6 Female to Female cable provides a robust and easy interface between the module and the 0-10V Input Port on the Hydros device (DO NOT connect to the 0-10V OUT port).
The secondary GX12-6 port on the module provides a connector for daisy chaining other 0-10V Input devices such as the 0-5V Button Box, or Hydros 0-10V adapters. This module uses 0-10V Input Channel 3 for Humidity and Channel 4 for Temperature. These assignments are fixed and can not be changed. Unused channels 1/2 are passed through the pair of GX12-6 connectors.
Each unit comes with:
- 1 Hydros Room Humidity/Temp Module box
- 1 Female to Female GX12-6 pin cable (20cm long cable included, note this is SHORT and required the module to be mounted
directly to the right of the Control 4 or Wave Engine as shown in the item picture. If you would like a longer cable, message us or put a note in the order 1M long also available)
The unit requires a Hydros Control 4 with channels 3/4 unused on the 0-10V IN port.
Full instructions are included via a web link or google for "JBA Hydros Humidity & Temp Module"
*Control 4 and JBA Button Box sold separately and not included but displayed in pictures as reference.